Accuphase DP-430

Specificaties: 

• Format Standard CD format
• Quantization: 16 bits
• Sampling frequency: 44.1 kHz
• Error correction principle: CIRC
• Number of channels: 2
• Revolution speed: 500 to 200 rpm (CLV)
• Scan velocity: 1.2 to 1.4 m/s, constant
• Data Read Principle Non-contact optical pickup
• Laser Diode GaAlAs (double hetero-junction visible-spectrum semiconductor laser diode) Wavelength: 667 nm
• Transport Outputs COAXIAL Format: IEC 60958 compliant
• OPTICAL Format: JEITA CP-1212 compliant
• Digital Inputs COAXIAL Format: IEC 60958 AES-3 compliant
• Suitable cable: 75-ohm coaxial digital cable
• OPTICAL Format: JEITA CP-1212 compliant
• Suitable cable: JEITA standard optical fiber cable
• USB Format: USB 2.0 Hi-Speed (480 Mbps) compliant
• Suitable cable: USB 2.0 cable
• Sampling Frequencies COAXIAL 32 kHz to 192 kHz (16 to 24 bits, 2-channel PCM)
• OPTICAL 32 kHz to 96 kHz (16 to 24 bits, 2-channel PCM)
• USB 32 kHz to 384 kHz (16 to 32 bits, 2-channel PCM) 2.8224 MHz, 5.6448 MHz, 11.2896 MHz (1-bit 2-channel DSD) (11.2896 MHz: ASIO only)
• D/A Converter 4MDS principle
• Frequency Response 0.7 to 50,000 Hz +0, –3.0 dB
• Total Harmonic Distortion 0.0008% (20 to 20,000 Hz)
• Signal-to-Noise Ratio 117 dB
• Dynamic Range 113 dB
• Channel Separation 113 dB
• Output Voltage and Impedance BALANCED: 2.5 V, 50 ohms, balanced XLR type; LINE: 2.5 V, 50 ohms, RCA phono jack
• Output Level Control 0 dB to –60.0 dB in 1-dB steps (digital)
• Supplied accessories
  ● Remote Commander RC-130
  ● AC power cord
  ● Audio cable with plugs AL-10; USB Utility 2 CD; USB Utility 2 Setup Guide
• Power requirements: 120/220/230 V AC, 50/60 Hz (voltage as indicated on rear panel)
• Power consumption: 13 W

Dimensies:

• Width: 465 mm (18.3˝); Height: 151 mm (5.9˝); Depth: 393 mm (15.5˝)
• Mass: 14.0 kg (30.9 lbs) net 20.0 kg (44.1 lbs) in shipping carton